.

Vizyon SCS-X sliding frameless glazing system

Vizyon SCS-X sliding frameless glazing system

Glazing systems perfectly create the effect of transparency and lightness in the room. By using them you can easily air the room or just enjoy the fresh breeze. But such constructions weigh quite a lot and often the upper supports are simply not able to withstand a load of several hundred kilograms. So what shall you do if you want to install a frameless sliding glazing system, but the features of the structure do not allow it? Solution is very simple: just use Vizyon SCS-X model.

Parameter Value
System type Bottom-supported
Thickness of tempered glass, mm 8-10
Max. panel width, mm 1200
Max. panel height, mm 2500

All Vizyon systems are in stock and available to order.

Vizyon SCS-X sliding frameless glazing system

Glazing systems perfectly create the effect of transparency and lightness in the room. By using them you can easily air the room or just enjoy the fresh breeze. But such constructions weigh quite a lot and often the upper supports are simply not able to withstand a load of several hundred kilograms. So what shall you do if you want to install a frameless sliding glazing system, but the features of the structure do not allow it? Solution is very simple: just use Vizyon SCS-X model.

Main peculiarities:

The main advantage of the Vizyon SCS-X sliding frameless glazing system is its low support. The entire weight of this construction is distributed to the lower load-bearing moldings and special reinforced upper supports are not required for installation.

Such a model can be made up in 3- or 5-track variations. Each of the tracks holds one glass door on a roller carriage. When opening the system, all the doors move to the parking area and hide behind each other. At the same time, they have herringbone effect, but are placed as compactly as possible, which allows ensuring the opening up to 80%.

Parking area literary can be either on one edge or on the other (for long systems you can also install parking on both sides at once).

The maximum width of one door is up to 1200 mm, height is 2300 mm. System length is up to 10 m. It can be increased, but in this case the installation of additional supports will be required.

Another very important Vizyon SCS-X distinguishing feature is its high lower molding (up to 23 mm). It helps preventing water from leaking into the room, snow sweeping, and trash coming from outside.

The system also has special additional seals at the bottom of each door and uses side sealed moldings. This helps the Vizyon SCS-X system protecting rooms from wind blowing and rainfall.

What is such a system intended use?

  1. On balconies and loggias. It perfectly protects the room from wind blowing, water and at the same time creates the effect of a glass wall and allows you to enjoy a beautiful view.
  2. On summer houses, terraces and verandas without a constant passage of people. A high threshold can interfere with normal passaging. But if a passage through the opening is not provided, then the Vizyon SCS-X will be an excellent choice.

Why is it worth buying such a sliding glazing system?

  1. High opening percentage. Due to several rails that move doors and hide them in the parking area one after the other, the system opens by 80%. This is more than enough to enjoy the wonderful breeze or ventilate the room.
  2. Protection from wind blowing and moisture. A high lower molding and dense seals will protect your balcony or loggia from unpleasant weather and help you creating the perfect microclimate inside.
  3. Lower support. One door weight of a frameless glazing system can reach 30-40 kg. This means that parking area on the upper support in most models is subject to a pressure of several hundred kilograms. Not every construction can withstand such a load. Vizyon SCS-X system completely eliminates this problem. Due to the lower support, all loads go to the floor, which means that this construction be freely installed in almost any room.
  4. Break-in protection. Simple shutters are installed on the extreme doors, which can be easily closed even with your feet. Due to such construction, system is completely fixed and cannot be opened from the outside.
  5. High quality glass. Vizyon SCS-X sliding systems use shock-resistant tempered glass with 8 or 10 mm thickness. They easily withstand strong wind gusts and can be installed at high altitude. Also, such a glass is very difficult to break.
  6. Durability. All mechanical parts of the system are made of non-corrosive materials (stainless steel, aluminum,
  7. Эстетичный внешний вид. Стекло системы можно декорировать фактически любым способом и оформлять в одном стиле со всем дизайном помещения. Профиля могут быть либо под покраску, либо из специального анодированного алюминия, который выглядит эстетично и современно.
  8. Affordable price. Vizyon SCS-X system cost is lower than similar offers from competitors. Moreover, its quality is much higher.

Thus, Vizyon SCS-X frameless glazing system will not only help you enjoying beautiful views from the balcony and veranda, but also protect the room from wind blowing and rainfall. 

Photo SCS-X

Video SCS-X

How to choose frameless glazing system?

Sliding system interstitial gaskets

 

Sliding system features

^ To top
Asking
price
Calculate the cost by size

Our customers are very busy people. We save your time, therefore we simplified the work scheme and made it as convenient as possible for you.

If you want to know the approximate cost for the size of your terrace, balcony, then immediately go to the Price list , the price is for the finished construction with the installation VBS VBS-X, L SCS-X SCS-L KCS-L KCS  how can the systems work in systems video review

If you are already ready to place an order, then you no longer need to wait for the measurer, while adjusting your plans, it is enough:

Send photos of the openings you want to glaze (terrace, barbecue area, interior partition, etc.) and approximate dimensions (error up to 1 cm is permissible) to us by email biuro@vizyon.company or by WhatsApp number +48573 580 838. Alternatively, you can send a freehand drawing or a draft. Be sure to include your contacts for feedback. Indicate your wishes on the operation of the sliding system, if any.

We will make a calculation and send you a commercial proposal and video of the system that is more suitable in terms of technical parameters and your wishes, as well as write down the sequence of further actions to start the project in work.